BONDiTe 5L
BONDiTe 5L
BONDiTe® is a ready-to-use polymer-based primer and keying agent that has been specifically designed as a bonding agent for self-levelling compounds. BONDiTe® is an essential component in the LEVELiTe® self-levelling system which must be applied as a primer for LEVELiTe® self-levelling compounds.
It has four functions – LEVELiTe® adhesion promoter, to bind any dustiness in the substrate, to prevent any air bubbles trapped in the substrate from migrating to the surface causing pin-holes, and also to promote the flow of the self leveller over the surface.
Additional Product Data
BONDiTe® is a ready-to-use polymer-based primer and keying agent that has been specifically designed as a bonding agent for self-levelling compounds. BONDiTe® is an essential component in the LEVELiTe® self-levelling system which must be applied as a primer for LEVELiTe® self-levelling compounds. It has four functions – LEVELiTe® adhesion promoter, to bind any dustiness in the substrate, to prevent any air bubbles trapped in the substrate from migrating to the surface causing pin-holes, and also to promote the flow of the self leveller over the surface. BONDiTe® dries very fast and is typically ready for application of self levelling compound in approximately twenty minutes.
BONDiTe® contains no VOC’s and is totally compliant with green building requirements.
BONDiTe® is pre-mixed and does not require mixing.
Stabilizing of friable surfaces or as a primer for LEVELiTe® self-levelling screed: Apply neat BONDiTe®, ensuring that the surface is thoroughly coated, using a block brush or roller. It must be left to dry completely before starting to apply the levelling compound
When used as a primer, BONDiTe® will cover between 4 and 5m² per litre depending the smoothness of the screed.
All data supplied is based on laboratory tests conducted at 20º C, and 50% Relative Humidity. On-site atmospheric conditions may require adaptation to suite circumstances.
Do not ingest. Keep away from children and pets. Do not empty into a drain. Wear rubber gloves, and in the event of prolonged contamination, rinse thoroughly with cold water. Seek medical attention if irritation persists. Consult our Material Safety Data Sheet for more information.
The information supplied in our literature or given by our employees is given in good faith. We reserve the right to update this information at any time without prior notice. We guarantee the consistent high quality of our products, however, we have no control over the site conditions or execution of the work. We accept no liability for any loss or damage which may arise as a result thereof.
BONDiTe® is a multi-purpose concrete Primer and Sealer. It improves adhesion of substances such as adhesive to the concrete.
It’s binding properties are superior to older technology primers and bonding agents such as SBR Latices and is used to prevent delamination or separation. This binding prevents the release of any dust or particles from the concrete substrate onto which it has been applied.
BONDiTe® is used for mortar and concrete strengthening as a bonding agent.