Only enough PATCHiTe® that can be applied in 10 to 15 minutes must be mixed at a time, as it sets  extremely rapidly. Equipment must be rinsed off continuously to ensure removal of the PATCHiTe® before  it sets. 

USAGE RATE: Approximately 2Kg per m² per mm thickness. ( 1 x 25Kg Bag should yield approximately  1.2m² at 10mm thickness) 

Pour sufficient PATCHiTe® powder for a mix based on the above factors into a mixing vessel such as a  bucket, or rubber bin as for self-levelling compound. Gradually add water while stirring the mixture until a  consistency similar or the same as a normal plaster mix for trowelling the mix into the hole is obtained.  The dry components should be lump free and evenly distributed through the wet mix. A water ratio of 17%  water to powder should not be exceeded.

When properly mixed, pour the mixture into the area to be patched, using a flat steel trowel to obtain a  smooth, level surface flush with the surrounding surface. Remember to work quickly within the ten to  fifteen minutes that the mixture is workable. 

While the first mix is being applied, mix the second batch to ensure a continuous flow of material until the  area to be patched is complete. 

When the patch has been completely filled, leave the area to dry before the next step is started. As a  general rule the patch should be left for at least three hours before applying levelling compound. The drying  is dependent on climatic conditions as well as the thickness of the application, and we recommend that the  levelling compound be applied the next day.

Clean the equipment used in mixing and application as soon as possible with running water, and if  necessary a cleaning cloth to prevent the PATCHiTe® from setting on the equipment.

Tab Item Content

Tab Item Content